Certificates
Air Source Heat Pump
Our air source heat pump can be installed on the top of the building, or in the yard, or on the balcony, it means there must be enough air to blow. Refrigerant absorb heat from air, and release heat to sanitary water or house heating system water. Air source heat pump has following features:
1.Using large evaporator, specially made for cold weather place
2.Condenser use double-pipe heat exchanger, high efficiency and large internal diameter so that prevent water blocking because of dirty
3.Use scroll compressor, working stable and long lifetime
4.Centrifugal or axial fan motor makes sure low noise and beautiful appearance
5. Use electric expansion valve, adjust the refrigerant flow automatically
6.Adopt PID defrosting, defrosting according to time, evaporating temperature and environment temperature
7.Touch screen design, and LED display control panel, nice and grace looking
8.Multi-function controller, can check and set all the parameters, multi-protection and alarming function
9.Evaperator and fan motor are insulated from other components , such as compressor, condenser and son on, to make sure other components will not touch condensed water and will not stained fore ever
10.Condensed water flow down to ground through a water pipe, the pipe connects the water hole at the middle and the bottom layer plate. So the water condensed can be drained at once
11.Use insulation for compressor, condenser and pipes, make sure reduce vibrate and noise and heat loss
12.Stick silencer cotton on the internal wall of the heat pump, to reduce noise.
13.R417/R407/R404 refrigerant, environment friendly.
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
The applicable range of China air source heat pump is very abroad, large commercial heat pump is suitable for hotel, wineshop, school, hospital, sauna room, beauty parlor, swimming pool, washhouse, and so on, and small domestic heat pump is suiable for family.